In October 2023, the FDA released draft guidance entitled “Communications From Firms to Health Care Providers Regarding Scientific Information on Unapproved Uses of Approved/Cleared Medical Products: Questions and Answers Guidance for Industry” (“2023 Draft Guidance”).[1] The 2023 Draft Guidance supersedes previous draft guidance from 2014 entitled “Distributing Scientific and Medical Publications on Unapproved New Uses–Recommended Practices” (“2014 Draft Guidance”), which was a revision of a 2009 final guidance entitled “Good Reprint ...

Our latest focus is trying to bring data to bear on common questions we get asked by clients.  Last month the topic was: how well does my device need to perform to get premarket clearance from FDA?  This month it is: how big does my sample size need to be for any necessary clinical trial for premarket clearance? 

To date, our typical answer has been, it depends.[1]  We then explain that it’s not really a regulatory question, but a question for a statistician that is driven by the design of the clinical trial.  And the design of the clinical trial is driven by the question the clinical trial is trying ...

On October 31, 2023, FDA hosted a webinar to address some of the frequently asked questions the agency has received since the September 29, 2023 release of its proposed rule on laboratory developed tests (“LDTs”). The materials from the webinar are available on FDA’s CDRH Learn webpage. Importantly, FDA announced during the webinar that the agency does not currently plan to extend the comment period for the proposed rule beyond the standard 60-day timeframe, and therefore, comments are still due on Monday December 4, 2023. In both the preamble to the proposed rule and stated ...

This month I wanted to take a data-driven look at FDA’s treatment of citizen petitions, and specifically as a starting point how quickly the agency resolves those petitions.  Make no mistake, I have an interest in this topic.  Over the more than 35 years I have been practicing law, I have filed multiple petitions including a 1995 petition that successfully caused FDA to adopt Good Guidance Practices.  But more recently, specifically on February 6, 2023, I filed a citizen petition asking FDA to rescind its final guidance on Clinical Decision Support Software.[1]  On August 5, 2023, when we ...

In a last minute push before an anticipated government shutdown, FDA put down its marker for moving forward toward regulation of lab developed tests (“LDTs”). Unlike past proposals from FDA and Capitol Hill, FDA has taken a simple approach: laboratories that make LDTs for clinical use are manufacturing in vitro diagnostic medical devices (“IVDs”) for commercial distribution, and as such must eventually comply with FDA’s already-established IVD requirements. The FDA zeitgeist boils down to this: It doesn’t matter if the lab is large or small, for profit or ...

It’s common for a client to show up at my door and explain that they have performance data on a medical device they have been testing, and for the client to ask me if the performance they found is adequate to obtain FDA clearance through the 510(k) process. I often respond, very helpfully, “it depends.” But for some reason clients aren’t completely satisfied by that.

I then volunteer that a general rule of thumb is 95%, but that this is just a rule of thumb. For Class II medical devices undergoing review through the 510(k) process, the legal standard is that the applicant must show that ...

As discussed in our June Insight, earlier this year FDA publicly announced its development of a proposed rule that would expressly define laboratory developed tests (“LDTs”) as medical devices and subject them to the agency’s regulatory authority. Such a rule would be FDA’s first comprehensive attempt to impose its authority over LDTs since its 2014 draft guidance, which FDA ultimately chose not to finalize, and comes after several failed congressional legislative attempts to do the same.

Recently Colleen and Brad had a debate about whether Medical Device Reports (“MDRs”) tend to trail recalls, or whether MDRs tend to lead to recalls. Both Colleen and Brad have decades of experience in FDA regulation, but we have different impressions on that topic, so we decided to inform the debate with a systematic look at the data. While we can both claim some evidence in support of our respective theses based on the analysis, Brad must admit that Colleen’s thesis that MDRs tend to lag recalls has the stronger evidence. We are no longer friends. At the same time, the actual data didn’t really fit either of our predictions well, so we decided to invite James onto the team to help us figure out what was really going on. He has the unfair advantage of not having made any prior predictions, so he doesn’t have any position he needs to defend.

This post explores how bias can creep into word embeddings like word2vec, and I thought it might make it more fun (for me, at least) if I analyze a model trained on what you, my readers (all three of you), might have written.

Often when we talk about bias in word embeddings, we are talking about such things as bias against race or sex.  But I’m going to talk about bias a little bit more generally to explore attitudes we have that are manifest in the words we use about any number of topics.

Would it surprise you if I told you that a popular and well-respected machine learning algorithm developed to predict the onset of sepsis has shown some evidence of racial bias?[1]  How can that be, you might ask, for an algorithm that is simply grounded in biology and medical data?  I’ll tell you, but I’m not going to focus on one particular algorithm.  Instead, I will use this opportunity to talk about the dozens and dozens of sepsis algorithms out there.  And frankly, because the design of these algorithms mimics many other clinical algorithms, these comments will be applicable to clinical algorithms generally.

In this episode of the Diagnosing Health Care Podcast:  A complex landscape of state laws overlays the direct access testing model, ranging from physician order requirements, such as telemedicine standards and the corporate practice of medicine doctrine, to specimen collection considerations, including how the varying options for collection could impact a model.

How do these factors combine to create a roadmap for companies navigating the direct access testing industry?

In this episode of the Diagnosing Health Care Podcast:   The U.S. Food and Drug Administration (FDA) recently issued a final guidance document clarifying how the agency intends to regulate clinical decision support (CDS) software.

How has this document caused confusion for industry? How can companies respond?

Introduction

Let’s say FDA proposed a guidance document that would change the definition of “low cholesterol” for health claims.  Now let’s say that when FDA finalized the guidance, instead of addressing that topic, FDA banned Beluga caviar.  If you are interested in Beluga caviar, would you think you had adequate opportunity to comment?  Would you care if FDA argued that Beluga caviar was high in cholesterol so the two documents were related?

The regulatory environment at the US Food and Drug Administration (“FDA”) has a tremendous impact on how companies operate, and consequently data on that environment can be quite useful in business planning.  In keeping with the theme of these posts of unpacking averages, it’s important to drill down sufficiently to get a sense of the regulatory environment in which a particular company operates rather than rely on more global averages for the entire medical device industry.  On the other hand, getting too specific in the data and focusing on one particular product category can prevent a company from seeing the forest for the trees.

Recently, I was asked by companies interested in the field of digital medical devices used in the care of people with diabetes to help them assess trends in the regulatory environment.  To do that, I decided to create an index that would capture the regulatory environment for medium risk digital diabetes devices, trying to avoid getting too specific but also avoiding global data on all medical devices.  In this sense, the index is like any other index, such as the Standard & Poor 500, which is used to assess the economic performance of the largest companies in terms of capitalization.  My plan was to first define an index of product codes for these medium risk digital diabetes products, then use that index to assess the regulatory environment in both premarket and postmarket regulatory requirements.

It is certainly easy, when writing code to accomplish some data science task, to start taking the data on face value.  In my mind, the data can simply become what they claim to be.  But it’s good to step back and remember the real world in which these data are collected, and how skeptical we need to be regarding their meaning.  I thought this month might be an opportunity to show how two different FDA databases produce quite different results when they should be the same.

The motivation for this month’s post was my frustration with the techniques for searching the FDA’s 510(k) database.  Here I’m not talking about just using the search feature that FDA provides online. Instead, I have downloaded all of the data from that database and created my own search engine, but there are still inherent limitations in what the data contain and how they are structured.  For one, if you want to submit a premarket notification for an over-the-counter product, it really isn’t easy to find predicates that are specifically cleared for over-the-counter without a lot of manual work.

To see if I could find an easier way, I decided to use the database FDA maintains for unique device identifiers, called the Global Unique Device Identification Database (GUDID).  You can search that database using the so-called AccessGUDID through an FDA link that takes you to the NIH where the database is stored. That site only allows for pretty simple search, so for what I needed to do, I downloaded the entire database so I could work directly on the data myself.

While the UDI database is enormous at this juncture (over 3 million products), what I found left me with questions about just how comprehensive and complete the data are.  At the same time, it seems like a good way to supplement the information that can be gleaned from the 510(k) database.

Over the spring and summer, I did a series of posts on extracting quality information from FDA enforcement initiatives like warning letters, recalls, and inspections.  But obviously FDA enforcement actions are not the only potential sources of quality data that FDA maintains.  FDA has what is now a massive data set on Medical Device Reports (or “MDRs”) that can be mined for quality data.  Medical device companies can, in effect, learn from the experiences of their competitors about what types of things can go wrong with medical devices.

The problem, of course, is that the interesting data in MDRs is in what a data scientist would call unstructured data, in this case English language text describing a product problem, where the information or insights cannot be easily extracted given the sheer volume of the reports.  In calendar year 2021, for example, FDA received almost 2 million MDRs.  It just isn’t feasible for a human to read all of them.

That’s where a form of machine learning, natural language processing, or more specifically topic modeling, comes in.  I used topic modeling last November for a post about major trends over the course of a decade in MDRs.  Now I want to show how the same topic modeling can be used to find more specific experiences with specific types of medical devices to inform quality improvement.

A private equity client asked us recently to assess a rumor that FDA was on the warpath in enforcing the 510(k) requirement on medical devices from a particular region.  Such a government initiative would significantly deter investments in the companies doing the importing.  Turns out, the agency was not.  The FDA’s recent activities in the region were well within their historical norms.

But the project got us thinking, what does the agency’s enormous database on import actions tell us about the agency’s enforcement priorities more generally?  There are literally thousands of ways to slice and dice the import data set for insights, but we picked just one as an example.  We wanted to assess, globally, over the last 20 years, in which therapeutic areas has FDA been enforcing the 510(k) requirement most often?

You might be thinking, that’s an odd title: obviously FDA’s breakthrough device designation is helpful.  However, after looking at the data, my conclusion is that I would avoid the breakthrough device designation for any product that qualifies for the 510(k) process.  The process is likely not helpful for such devices.

[Update - August 3, 2022: See the bottom of this post.]

Recalls have always been a bit of a double-edged sword.  Obviously, companies hate recalls because a recall means their products are defective in some manner, potentially putting users at risk and damaging the brand.  They are also expensive to execute.  But a lack of recalls can also be a problem, if the underlying quality issues still exist but the companies are simply not conducting recalls.  Recalls are necessary and appropriate in the face of quality problems.

Thus, in terms of metrics, medical device companies should not adopt as a goal reducing recalls, as that will lead to behavior that could put users at risk by leaving bad products on the market.  Instead, the goal should be to reduce the underlying quality problems that might trigger the need for recall.

What are those underlying quality problems?  To help medical device manufacturers focus on the types of quality problems that might force them to conduct a recall, we have used the FDA recall database to identify the most common root causes sorted by the clinical area for the medical device.

Most companies want to avoid FDA warning letters.  To help medical device companies identify violations that might lead to a warning letter, this post will dive deeply into which specific types of violations are often found in warning letters that FDA issues.

Background

As you probably know, FDA has a formal process for evaluating inspection records and other materials to determine whether issuing a warning letter is appropriate.  Those procedures can be found in chapter 4 of FDA’s Regulatory Procedures Manual.  Section 4-1-10 of that chapter requires that warning letters include specific legal citations, in addition to plain English explanations of violations.  The citations are supposed to make reference to both the statute and any applicable regulations.

As a consequence, to understand the content of the warning letters, we need to search for both statutory references as well as references to regulations.  Because statutes are deliberately drafted to be broader in their language, references to the regulations tend to be more meaningful.

Overview

In this month’s post, in the medical device realm I explore what kinds of inspection citations most often precede a warning letter.  In this exercise, I do not try to prove causation.  I am simply exploring correlation.  But with that caveat in mind, I think it’s still informative to see what types of inspectional citations, in a high percentage of cases, will precede a warning letter.  And, as I’ve said before, joining two different data sets – in this case inspectional data with warning letter data – might just reveal new insights.

In this episode of the Diagnosing Health Care Podcast:  What has contributed to the biotechnology industry’s explosive growth over the last several years? In this episode, special guests Don and Lisa Drakeman, two former CEOs of biotech companies, reflect on what it takes to succeed, the regulatory challenges they have faced, and how current events are shaping the future of the industry.

It is common for FDA and others to show a map of the United States with the states color-coded by intensity to showcase the total number of inspections done in that state.  Indeed, FDA includes such a map in its newly released dashboard for FDA inspections.  In reviewing that map with the U.S. map color-coded to reflect where medical device establishments are located, do you notice anything?  Not to destroy the suspense for you, but it turns out that FDA tends to inspect where medical device inspection facilities are located.  Really.

We wanted to get beneath those numbers in two ways.  First, it’s much more informative to look at the data at a county level because there’s actually quite a bit of variation county by county.  Second, and more importantly, we wanted to normalize the inspection data by the number of facilities.  In other words, by looking at inspections per facility, we can get a better sense of the inspection frequency in each county.

On September 15, 2021, CMS published a proposed rule that would repeal a final rule that created an expedited pathway for Medicare coverage of breakthrough devices and established formal criteria for applying the “reasonable and necessary” standard for coverage in Section 1862(a)(1)(A) of the Social Security Act, which has been the basic standard for coverage since the inception of the Medicare program.[1]  CMS has set a short period for comments, and interested parties must submit comments by October 15, 2021.

The new proposed rule reflects a significant policy change.  Where the initial rule focused on expanding access to new innovations, the current approach focuses more on Medicare program goals and outcomes data.

Based on their extensive experience advising health care industry clients, Epstein Becker Green attorneys and strategic advisors from EBG Advisors are predicting the “hot” health care sectors for investment, growth, and consolidation in 2020.  These predictions for 2020 are largely based on the increasing confluence of the following three key “drivers” of health industry transformation that is substantially underway:

1. The ongoing national imperative of reducing the cost of health care, via disease prevention and detection, and cost-effective, quality treatment, including more efficient care in ambulatory and retail settings;
2. Extraordinary advances in technologies which enhance disease prevention, detection and cost-effective treatment (e.g., artificial intelligence (AI)-driven diagnosis and treatment, virtual care, electronic medical record (EMR) systems, medical devices, gene therapy, and precision medicine); and
3. The aging baby-boomer population, with tens of millions of Americans entering into their 70s, 80s, and above.

When we think about the top players in the medical device development space, we often see device company sponsors, clinicians, scientists, and FDA regulators as the ones driving the process. But what about the patient perspective? Does that get factored in?

On May 3, 2019, FDA established a docket to collect public input on a proposed list of patient preference-sensitive areas for medical device review, and posed certain related questions (comments are due July 2, 2019). By identifying these key areas (which it committed to as part of the reauthorization of the Medical Device User Fee ...

Many physicians rely on publicly available reports to assess the safety of the devices they use on patients, but in some cases, these reports aren’t painting the full picture.  A recent Kaiser Health News (“KHN”) article raises serious questions about FDA’s practice of allowing a significant number of medical device injury and malfunction reports to stay out of the public eye.

Under FDA’s Medical Device Reporting (“MDR”) regulation (21 CFR part 803), device manufacturers, importers, and device user facilities (which include hospitals, ambulatory surgery ...

On February 15, 2019, the U.S. Food and Drug Administration (“FDA”) finalized two guidance documents regarding regenerative medicine therapies (see FDA’s announcement here). This development comes nearly 14 months after FDA issued both guidance documents in draft form, which also coincided with FDA’s announcement of a new comprehensive regenerative medicine policy framework intended to spur innovation and efficient access to new regenerative medicine products.

FDA Commissioner Scott Gottlieb remarked that the finalization of regenerative therapy guidance ...

There is a new kid on the block . . . the Chief Data Officer (CDO).  There is no surprise in our data-driven world that such a role would exist. Yet, many organizations struggle with defining the role and value of the CDO. Effective implementation of a CDO may be informed by other historical evolutions in the C-Suite.

Examining the rise of the Chief Compliance Officer (CCO) in the 2000’s mirrors some of the same frustrations that organizations faced when implementing the CCO role. While organizations were accustomed to having legal, HR, and internal audit departments working together to ...

On October 18, 2018, the FDA published Content of Premarket Submissions for Management of Cybersecurity in Medical Devices.  This guidance outlined recommendations for cybersecurity device design and labeling as well as important documents that should be included in premarket approval submissions.  This guidance comes at a critical time as the healthcare industry is a prime target for hackers.  On January 22, 2019, the U.S. Department of Homeland Security Industrial Control System Cyber Emergency Team (US-CERT) issued another advisory regarding medical device ...

The federal government entered into a partial shutdown at midnight on Saturday, December 22, 2018. The implications of the ongoing shutdown are far-reaching, but its impact on the Food and Drug Administration (“FDA”) is of particular concern to members of FDA-regulated industries and those with a role in ensuring the public health. Thousands of FDA employees considered non-essential were furloughed and, consequently, routine regulatory and compliance activities at FDA were put on hold. On his Twitter account (@SGottliebFDA), Scott Gottlieb, M.D., Commissioner of the FDA ...

On December 7, 2018, the U.S. Food and Drug Administration (“FDA”) published a proposed rule (“Proposed Rule”) that, if finalized, would clarify the de novo classification process for medical devices, including (1) the format and contents of a de novo request and (2) the criteria for accepting or denying a de novo request. FDA intends to “enhance regulatory clarity and predictability... [and] provide a regulatory framework that sets clear standards, expectations and processes for de novo classification” through this proposed rulemaking.[1]

FDA regulates medical ...

On November 26, 2018, the U.S. Food and Drug Administration (“FDA”) announced the process for clearing most medical devices for marketing is being updated to incorporate changes the FDA laid out in an April draft guidance. For over forty years, most medical devices have entered the United States market through the 510(k) clearance process. The 510(k) process offers an expedited approval process available only for products that are substantially equivalent to products already on the market (known as predicate devices). The FDA is considering no longer allowing sponsors to ...

On November 1, 2018, the Office of the Inspector General (“OIG”) for the U.S. Department of Health and Human Services (“HHS”) published an audit report finding that the U.S. Food and Drug Administration’s (“FDA”) policies and procedures were “deficient for addressing medical device cybersecurity compromises.” (A copy of OIG’s complete report is available here and Report in Brief is available here.) Specifically, the OIG found that FDA’s policies and procedures were “insufficient for handling postmarket medical device cybersecurity events” and ...

On November 2, 2018 CMS announced the finalization of the 2019 OPPS and ASC payment rules which were initially proposed in July of 2018.[1] [2] While the final document will not be officially published until November 21st, an Inspection Copy is available for the public to review on the Federal Register website. These new payment rules in many ways expand the range of services that CMS will reimburse when performed at Ambulatory Surgical Centers (ASCs), most notably, by including certain cardiac catheterization procedures on the approved list, and by lowering the threshold that ...

On October 15, 2018, the Centers for Medicare and Medicaid Services (CMS) unveiled its proposed rule requiring direct-to-consumer television advertisements for prescription drug and biological products to contain the list price (defined as the Wholesale Acquisition Cost) if the product is reimbursable by Medicare or Medicaid. Medical devices are not included in the proposed rule, although CMS seeks comment on how advertised drugs should be treated if used in combination with a non-advertised device. If finalized, the requirement will be sweeping and only purports to exclude ...

The FDA issued a new Draft Guidance today to ensure medical devices - an increasing potential target for hackers - are better protected from unauthorized digital access.

According to the FDA’s draft guidance issued today, “Cybersecurity incidents have rendered medical devices and hospital networks inoperable, disrupting the delivery of patient care across healthcare facilities in the US and globally. Such cyberattacks and exploits can delay diagnoses and/or treatment and may lead to patient harm.”

Under the proposed draft guidance manufacturers will be required to ...

The Florida State Legislature has decided to eliminate its state licensure requirement for clinical laboratories.  Effective July 1, 2018, Florida’s recent legislation (SB 622) repeals the entirety of Chapter 483, Part I of the Florida statutes, and in doing so removes the state licensure requirement for clinical laboratories operating in-state and out-of-state.  Section 97 of SB 622, approved by the Governor on March 19, 2018, repeals the entirety of Chapter 483, Part I of the Florida statutes, and therefore, in tow, eliminates section 59A-7.024(1) and as well as all other ...

On January 16, 2018, the Department of Health and Human Services Office of Inspector General (OIG) published its most recent update to the agency’s “Work Plan.”  Of note to Durable Medical Equipment (DME) manufacturers, suppliers and prescribers, OIG signaled increased interest in the investigation of three specific off-the-shelf orthotic devices identified by the HCPCS codes:

• L0648—back bracing
• L0650—back bracing
• L1833—knee bracing

According to OIG, the government paid out $349 million for these braces in 2016, representing a 97% increase from just 2014.  OIG ...

The Federal Trade Commission ("FTC") and the Antitrust Division of the Department of Justice ("Antitrust Division") released their respective year-end reviews highlighted by aggressive enforcement in the health care industry. The FTC, in particular, indicated that 47% of its enforcement actions during calendar year 2016 took place in the health care industry (including pharmaceuticals and medical devices). Of note were successful challenges to hospital mergers in Pennsylvania (Penn State Hershey Medical Center and Pinnacle Health System), and Illinois (Advocate Health ...

Our colleagues Joshua A. Stein and Frank C. Morris, Jr., at Epstein Becker Green have a post on the Health Employment And Labor blog that will be of interest to many of our readers: "The U.S. Access-Board Releases Long-Awaited Final Accessible Medical Diagnostic Equipment Standards."

Following is an excerpt:

As part of a flurry of activity in the final days of the Obama Administration, the U.S. the Architectural and Transportation Barriers Compliance Board (the "Access Board") has finally announced the release of its Accessibility Standards for Medical Diagnostic Equipment (the ...

Early January has seen the release by FDA of a flurry of information on drug and device manufacturer communications, largely reaffirming FDA's long-held approach to restricting manufacturer communications regarding off-label uses of approved drugs and medical devices. The most significant positive development arising from these documents is the Agency's concession on proactive pre-approval communications with payors about investigational drugs and devices, allowing certain information to be provided to payors prior to a product's approval. FDA's guidance documents ...

On August 31, 2016, FDA issued a notification of public hearing and request for comments on manufacturer communications regarding unapproved uses of approved or cleared medical products. The hearing will be held on November 9-10, 2016, and individuals wishing to present information at the hearing must register by October 19, 2016. The deadline for written comments is January 9, 2017.

In the notice, FDA posed a series of questions on which it is seeking input from a broad group of stakeholders, including manufacturers, health care providers, patient advocates, payors, academics ...

On May 17, 2016, FDA issued Draft Guidance for Industry on Use of Electronic Health Record Data in Clinical Investigations ("Draft Guidance").  This Draft Guidance builds on prior FDA guidance on Computerized Systems Used in Clinical Investigations and Electronic Source Data in Clinical Investigations, and provides information on FDA's expectations for the use of Electronic Health Record ("EHR") data to clinical investigators, research institutions and sponsors of clinical research on drugs, biologics, medical devices and combination products conducted under an ...

Epstein Becker Green has just released the 50-State Survey of Telemental/Telebehavioral Health (2016), a groundbreaking, comprehensive survey on the laws, regulations, and regulatory policies impacting telemental health in all 50 states and the District of Columbia.

While other telehealth studies exist, this survey focuses solely on the remote delivery of behavioral health care.

Compiled by attorneys in Epstein Becker Green's Telehealth practice, the survey details the rapid growth of telemental health—mental health care delivered via interactive audio or video ...

While FDA made a push last fall to explore the technical challenges associated with 3-D printed devices (holding a public workshop in October 2014), the Agency's planned guidance on the topic fell to the "B-list" in FDA's 2015 medical device guidance agenda. According to the agenda, the Agency will issue a draft guidance document on 3-D printing as "guidance-development resources permit." In light of the regulatory uncertainty facing 3-D printing stakeholders, this may seem like unwelcome news – but is it?

Recent comments from Agency officials suggest that immediate guidance is ...

When FDA published its draft guidance Internet/Social Media Platforms with Character Space Limitations— Presenting Risk and Benefit Information for Prescription Drugs and Medical Devices in June 2014, I, like many others with an interest in pharmaceutical and medical device promotion, believed that the issue of social media promotion of drugs and medical devices was largely settled. Even with the limited concessions offered by FDA to reduce the traditional risk disclosure requirements, absent a substantial shift in FDA's position, Twitter was not going to be a medium that ...

As we move into 2015, stories about the use of 3-D printing (also called additive manufacturing) in the health care industry continue to hit headlines. Some 3-D printed products are already available to U.S. patients, including knee and cranial implants, while others, including a graft device to treat aneurysms, are coming down the pipeline.

In touch with this trend, FDA has formed an Additive Manufacturing Working Group, and in October 2014, the Agency engaged industry stakeholders to discuss technical considerations surrounding 3-D printed products. However, according to ...

In early October, FDA held a public workshop to discuss the challenges of regulating medical devices made through additive manufacturing (also known as 3-D printing). Additive manufacturing gives designers the ability to build devices directly from 3-D images, like patient CT or MRI scans. As the push toward personalized medicine continues, 3-D printed devices hold incredible potential for advancing the ball. While additive manufacturing isn't completely mainstream yet, FDA and industry stakeholders expect to see major growth in this field in coming years. Experts project ...

As reported previously in this blog and in an EBG Client Alert, FDA has recently reopened the comment periods for three draft guidance documents released this year: two on social media promotion (open until October 29) and one on informed consent information sheets (open until October 27).  FDA does not often reopen the door to comment after the required notice-and-comment period has closed, and the fact that FDA has chosen to do so for these draft guidances is significant.  In all three cases, FDA received communications from stakeholders requesting additional time to digest the ...

Earlier this year, FDA released draft guidance the pharmaceutical and medical device industries had been awaiting for five years.  But instead of revolutionizing the Agency's thinking on drug and device promotion, FDA's social media guidance essentially continued the familiar credo on advertisements—accurate and not misleading, fair balance, substantiation—and ignored some of the central features of social media.  Last week, FDA reopened the comment period for the character-space limited communications and correcting third-party misinformation guidances.  Now ...

Earlier this month, Customed, Inc. initiated the largest medical device recall ever recorded in FDA history.  The recall was of sterile convenience surgical packs and was due to packaging flaws.  These flaws could result in loss of sterility and lead to infection.  There have also been a number of voluntary recalls on the drug side related to sterility.  FDA has also issued warning letters to pharmaceutical companies for poor aseptic practices, among other Good Manufacturing Practices (cGMP) related issues.  These headlines should remind the medical device and pharmaceutical ...

Upon learning that FDA had lost another round in its battle to classify Diphoterine® Skin Wash (DSW) as a combination product with a drug primary mode of action and that Prevor, DSW's manufacturer, was still fighting this issue nearly six years after it submitted its initial premarket notification for DSW, I turned into a five-year-old and kept asking why?

• Why does FDA insists that a skin wash intended to "help prevent and minimize accidental chemical burn injuries" must be regulated as a drug but a drug-coated stent intended to improves arterial diameter is regulated as a device?
• Why ...